Msg_ErrLoadNOWINST=Could not load NOWINST.DLL.\n\nSetup cannot continue.
Msg_ErrReqVGA=This program requires VGA or better resolution.
Msg_ErrPatchGstLic=Error patching license information to the Teacher.\nError = %d\nSetup cannot continue.
Msg_ErrPatchHstLic=Error patching license information to the Student.\nError = %d\nSetup cannot continue.
Msg_ErrNetOpRunning=The NetOp Guest or the NetOp Host program is running. Please terminate the program and run setup again.
Msg_ErrComponent=Component:
Msg_ErrFileGroup=File Group:
Msg_ErrMoveData=An error occurred during the move data process: %d
Msg_ErrFile=File:
Msg_ErrUnInstSetup=unInstaller setup failed to initialize. You may not be able to uninstall this product.
Msg_ReadReadMe=Do you want to view the README file now?
Msg_CmpltCopyRst=Some files could not be installed because they are currently in use by other programs in the system. To allow for the proper operation of the new program you should restart your system at this time.
Msg_Cmplt=Setup is complete. You may run the installed programs by double-clicking on the program icons installed.
Msg_CmpltRst=Setup is complete, but you need to restart Windows before you can run NetOp. When you have restarted Windows you may run the installed programs by double-clicking on the program icons installed.\n\nDo you want to restart Windows now?
Msg_CmpltRstNT=Setup is complete, but you have to shutdown and restart Windows NT before you can run NetOp. When you have restarted Windows NT you may run the installed programs by double-clicking on the program icons installed.
Msg_FinRemoveDisk=Remove any disks from their drives, and then click Finish to complete Setup.
Msg_Finish=Click Finish to complete Setup.
Msg_ErrCreateDir=Unable to create a directory under %s.Please check write access to this directory.
Msg_ErrGenFiletrans=General file transfer error. Please check your target location and try again.\n\n Error Number=
Msg_NotEnoughSpace=There is not enough space available (%ld bytes) on the disk: '%s'. Please free up some space or change the target location to a different disk.
Msg_NoSelection=You have to select the NetOp Teacher, the NetOp Student or both for installation.
Msg_WillInstallTo=Setup will install the %s in the following directory.\n\nTo install to this directory, choose Next.\n\nTo install to a different directory, choose Browse.\n\nYou can choose not to install the %s or change destination directory again later.
Msg_CreatingDir=Creating folder. Please wait.
Msg_ErrCreateDirTry=Cannot create folder:\n%s\nPlease try another folder or disk.
Msg_RegGuestAndHost=Please register NetOp School with 'Licensed to' and enter\nthe serial numbers found on your license certificates.
Msg_RegGuest=Please register NetOp with 'Licensed to' and enter\nthe serial number found on your license certificate.
Msg_RegHost=Please register NetOp with 'Licensed to' and enter\nthe serial number found on your license certificate.
Msg_RegGstSernrBad=The Teacher serial number is not typed correctly. Please try again.
Msg_RegHstSernrBad=The Student serial number is not typed correctly. Please try again.
Msg_RegHstNotAccess=The Student serial number does not allow the host to be an Access Server. Please enter the correct serial number or go back and and select an other Host type
Msg_RegHstNotLog=The Student serial number does not allow the host to be a Log Server. Please enter the correct serial number or go back and and select an other Host type
Msg_RegHstNotGw=The Student serial number does not allow the host to be a gateway. Please enter the correct serial number or go back and and select an other Host type
Msg_RegUserFail=Sorry, but a wrong serial number has been entered 4 times. Please enter the number exactly as specified on your original License Certificate. If this fails, please contact tech. support via www.danware.com or your local supplier.
Msg_ErrSysOutOfDisk=Out of disk space. Could not install '%s'. Please free 200.000k of disk space on drive %s and restart the installation.
Msg_ErrSysUpdate=Setup encountered a problem during update of the file %s, and you must install the file manually. Exit Windows and move %s from the %s directory to the %s directory.
Msg_BackupInst=Saving old configuration. Please wait ...
Msg_UnInst=Uninstalling/Removing old version. Please wait ...
Msg_WinNTSysDirMsg=NetOp must install a driver into the Windows NT system drives directory. Plase enter the directory.
Msg_WinNTSysDir=Directory:
Msg_ExistDir=The %s directory does not exist. Please try again.
Msg_UpdRegError=Error updating Windows NT Registry. Please refer to the readme file on your NetOp diskette.
Msg_UpdNTServInstGeneral=Error installing NT services. Error: %ld. If you are not logged in as an administrator, try doing so and run setup again.
Msg_UpdNTServInstRights=Your user account has insufficient rights to install the NetOp services. Log on as an administrator and run setup again.
Msg_NotWinNTHost=You cannot install a Windows 3.1 Host on Windows NT system.
Msg_PrevInstFound=A previous installation is found in the install directory. Do you want to update the installation?
Msg_UpdOrgOpen=Could not open original file:\n%s
Msg_UpdNewOpen=Could not open new file:\n%s
Msg_UpdInstNewer=The installed file version is newer than the one you are upgrading to.
Msg_UpdUdpImpossible=Impossible to update the installed version.
Msg_UpdUdpError=Unknown error
Msg_ErrWinVersion=This version of NetOp is designed to run on Windows NT 3.51 or higher. Instead you should use NetOp for Windows.
Msg_IsNotAdmin=You can not install NetOp on Windows NT unless you have administrator rights. Please login with administrator rights and try again.
Msg_InvalidFolderChars=A folder name cannot contain any of the following characters: \\/:*?\<>|,.
Msg_UpgErUnknown=Cannot upgrade.
Msg_UpgErFromEval=Cannot upgrade from evaluation.
Msg_UpgErHostWiGuest=Cannot upgrade to a Host with Guest.
Msg_UpgErGuestWiHost=Cannot upgrade to a Guest with Host.
Msg_UpgErAccFrmHost=Cannot upgrade to an Access Server from a Host.
Msg_UpgErGwFrmHost=Cannot upgrade to a Gateway from a Host.
Msg_UpgErLgFrmHost=Cannot upgrade to a Log Server from a Host.
Msg_UpgErHostToAcc=Cannot upgrade to a Host from an Access Server.
Msg_UpgErHostToGw=Cannot upgrade to a Host from a Gateway.
Msg_UpgErHostToLg=Cannot upgrade to a Host from a Log Server.
Msg_UpgErToMoreUsers=Cannot upgrade to more users that original.
Msg_UpgErToLessUsers=Cannot upgrade to less users that original.
Msg_UpgErDiffProts=Cannot upgrade because different set of protocols is enabled.
Msg_UpgErOldHstSerial=Invalid old Host serial number.
Msg_UpgErOldGstSerial=Invalid old Guest serial number.
Msg_UpgErUpgWithEval=Cannot upgrade from an evaluation copy.
Msg_UpgErUpgWithUpg=Cannot upgrade because you entered an upgrade serial number to verify your original license. Enter your original serial number.
Msg_UpgRegUserFail=You have failed to enter the serial number 4 times. The install program will stop.
Msg_UpgGuestAndHost=This is an upgrade package.\n\nPlease enter the serial numbers for both Teacher and Student found on your original license certificates.
Msg_UpgGuest=This is an upgrade package.\n\nPlease enter the serial number for the Teacher found on the original license certificate.
Msg_UpgHost=This is an upgrade package.\n\nPlease enter the serial number for the Student found on the original license certificate.
Msg_UpgNewGstHstSnr=Please write your new serial numbers down on your original license certificate:\n\nTeacher Serial nr: %s\n\nStudent Serial nr: %s
Msg_UpgNewGstSnr=Please write your new serial number down on your original license certificate:\n\nTeacher Serial nr: %s
Msg_UpgNewHstSnr=Please write your new serial number down on your original license certificate:\n\nStudent Serial nr: %s
Log_UpdPrevInstllYes=Yes, Update the existing installation
Log_UpdPrevInstllNo=No, make a clean installation.
Log_TargetDirectory=Target Directory:
Log_UpgradeSnr=Upgrade serial number(s):
Log_UpgOriginalSnr=Original serial number(s):
IcoTxt_Guest=Guest
IcoTxt_Host=Host
IcoTxt_Access=Access Server
IcoTxt_Log=Log Server
IcoTxt_Gateway=Gateway
IcoTxt_Readme=Readme
IcoTxt_Manual=Manual
IcoTxt_AccessCnf=Access Server Configuration
IcoTxt_Teacher=Teacher
IcoTxt_Student=Student
Text_And=and
Text_NOWGuest=NetOp Teacher
Text_NOWHost=NetOp Student
Lnd_LicensedTo=&Licensed to:
Lnd_GuestSerialNumber=&Teacher serial nr:
Lnd_HostSerialNumber=&Student serial nr:
Component_Guest_Files=Guest Files
Component_Host_Files=Host Files
Component_Student_Files=Student Files
Component_Teacher_Files=Teacher Files
Component_HostType_Host=Host
Component_HostType_Gateway=Gateway
Component_HostType_LogServer=Log Server
Component_HostType_AccessServer=Access Server
Stat_CopyTeacherFile=Copying Teacher files...
Stat_CopyStudentFile=Copying Student files...
Stat_CopySecurityFiles=Copying Security files...
Msg_ErrSchoolNT=NetOp School does not support Windows NT
Lnd_SerialNr=&Serial nr:
Associate_Dif_NCF=The NetOp phonebook file type (.dwc) is not associated with NetOp. Do you want this file type to be associated with NetOp.
Associate_Dif_NSF=The NetOp script file type (.dws) is not associated with NetOp. Do you want this file type to be associated with NetOp.
Associate_Dif_RCF=The NetOp session recording file type (.dwr) is not associated with NetOp. Do you want this file type to be associated with NetOp.
Associate_RCF_Run=&Playback
Associate_NSF_Run=&Run
Associate_NCF_RemoteControl=&Remote Control
Associate_NCF_FileTransfer=&File Transfer
Associate_NCF_Chat=&Chat
Associate_NCF_AudioChat=&Audio Chat
Associate_NCF_ConProp=&Connection Properties
Stat_Media=Copying Media files...
Stat_Script=
Msg_RegGetSerialNumber=Please register NetOp with 'Licensed to' and enter the serial number found on your license certificate. The serial number will determine the module installed on your PC.
Msg_RegGetSerialNumberBad=The serial number is not typed correctly. Please try again.
Msg_WillInstallGuest=You have chosen to install a NetOp Teacher, if this is incorrect please choose Back and retype your serial number.\n\nThe Teacher will be installed in the following folder. To install to this folder, choose Next. To install to a different folder, choose Browse.
Msg_WillInstallHost=You have chosen to install a NetOp Student, if this is incorrect please choose Back and retype your serial number.\n\nThe Student will be installed in the following folder. To install to this folder, choose Next. To install to a different folder, choose Browse.
Msg_WillInstallGateway=You have chosen to install a NetOp Gateway, if this is incorrect please choose Back and retype your serial number.\n\nThe Gateway will be installed in the following folder. To install to this folder, choose Next. To install to a different folder, choose Browse.
Msg_WillInstallLogServer=You have chosen to install a NetOp Log Server, if this is incorrect please choose Back and retype your serial number.\n\nThe Log Server will be installed in the following folder. To install to this folder, choose Next. To install to a different folder, choose Browse.
Msg_WillInstallAccessServer=You have chosen to install a NetOp Access Server, if this is incorrect please choose Back and retype your serial number.\n\nThe Access Server will be installed in the following folder. To install to this folder, choose Next. To install to a different folder, choose Browse.
Msg_UpgErNNSFrmHost=Cannot upgrade to a NetOp Name Server from a Host.
Msg_UpgErHostToNNS=Cannot upgrade to a Host from a NetOp Name Server.
Msg_WillInstallNNS=You have chosen to install a NetOp Name Server, if this is incorrect please choose Back and retype your serial number.\n\nThe NetOp Name Server will be installed in the following folder. To install to this folder, choose Next. To install to a different folder, choose Browse.
